Water Float Valve is made to better adapt to different working conditions. It is sturdy, easy to clean, and uses 1/2" male inlet pipe thread. The float unit is non-toxic and not affected by medicines or other additives. The design makes it more adaptable to different installations. Can be used on PVC pipe to make your own automatic waterer.
Overall length is 7 ½” and has free flow outlet that have been tested to 100 psi.
Build Your own multi bird waterer with float valve and a piece of PVC pipe. Order a garden hose adaptor and simply connect a garden hose to the float valve and you have a worry free watering system.
To make an automatic waterer mount a float valve inside a 5 gallon pail about 5 inches below the top of the pail. Connect a garden hose to the garden hose adaptor (purchase separately). Use the tubing that comes with our bell drinkers and mount in the bottom of the pail allowing the waterer to operate by gravity flow on low pressure. (see pictures)
This will work on all of our drinkers that work with low pressure. Plasson Bell Drinker, 300 Cup Drinker, Bellmatic Waterer, Plasson Cup Drinker, BEC Drinkers, etc.
Please call our office with questions.