Site Information

  • Image 1

Basic MPU

Basic MPU

Product Description

Mobile Poultry Processing Unit

Basic MPU.  This is an example of an enclosed poultry MPU.

We do not build the units but will work with you in choosing the proper equipment, layout, and configuration for your mobile poultry processing unit.

There are numerous considerations for a mobile unit that we will discuss with you so your unit is exactly what you need.

The equipment specified will allow the operator to process up to 250 birds per hour depending on the correct number of personal and the correct chilling capacity.

A basic unit as specified would cost $45-50,000. Depending on your needs you can add or remove items you may feel are/are not necessary.

Basic equipment includes: 

22' L Tandem Axle Trailer 

12,000 lb. GVWR, 12,000 lb. GAWR Tandem Axles Estimated Curb Weight – 10,000 Lb

Overall Dimensions - 27 ft. Length x 102 in. Width x 154 in. Overall Height (W/Exh Fans)

Interior Dimensions - 22 ft., 4 in. Length x 98 in. Width x 96 in. Height

Platform Height from Ground - 36 in.

Road Clearance Height from Ground - 13 in.

Chassis Running Gear 

Electric Brakes w/ Breakaway Switch and Battery

16" Wheels Highway Tread Radial

One (1) Spare Tire and Wheel Assembly, Tire Carrier on Tongue

Trailering Equipment

7-way Trailer SAE J560 ICC Lighting Receptacle

2 5/16 Diameter Ball Hitch Coupler

Heavy Duty Front Hitch Jack (5,000 Lb) with Telescoping Leg and Sand Pad

(4) Telescoping Front and Rear Stabilizer Legs in Corner Posts

Standard ICC Stop, Turn, Tail, and Marker Lights, ICC Reflective Conspicuity Tape

Paint and Finish

Steel Frame Paint - Two (2) Coats Automotive Enamel Black (PPG DelFleet)

Exterior Paint Color - Pre-Painted White Baked Finish Aluminum

Customer to specify Color - Other Exterior Skin Colors Available

Z Tech Undercoating and Armaguard Rust proofing

Additional Body Equipment

Two (2) Skid Plates at Rear of Frame

Two (2) Curbside 32w x 80h Single RV Door with Flushlock

Two (2) 21 x 21 Framed Roof Opening for Exhaust Fans

Five (5) Fixed Safety Glass Tinted Windows (22"High x 36" Wide)

Two (2) Aluminum Grip Strut Step Assembly with Handrails and Leveling Feet

Two (2) Adjustable Sidewall Louvers with Screens for Makeup Air

Two (2) Roof Mount Direct Drive Exhaust Fans – 14” Diameter 2,000 CFM roof mounted exhaust units

Two (2) 36 In. Air Curtain Over CS Doors  2325 CFM

Interior Wall, Ceiling, and Floor Finish

3/8 in. Plywood Interior Lining on Walls and Ceiling

.090 White Fiberglass Interior Lining over Plywood on Walls and Ceiling

All Lining Seams to be Sealed for Water Resistant during Washdown

1" Foam Insulation with Vapor Barrier in Walls and Ceiling

2" Foam Insulation with Vapor Barrier in Floor

.100 Aluminum Tread Plate Flooring in Kill and Clean Room with formed 6” Toekick

Tapered to Center Drains with fully Welded Seams

Center Lateral Hinged Double Partition Wall - Full Width and Height with 32 w x 24 h Kick out Pass Through Opening

LP Gas Equipment

Two (2) Carbon Monoxide and Smoke Detectors

Gas Lines and Shutoffs to Service Equipment

High Volume Two Stage LP Gas Regulator

Racking for Five (6) 40 Lb. LP Gas

Electrical Service Equipment

120/240 VAC / 50 Amp / 1 Phase Electrical Service

One (1) 120/240 VAC / 50 Amp Inlet Receptacle

50 ft. / 50 Amp Shore Cable

Perimeter 4 x 4 Electrical Raceway at Wall/Ceiling Transition

Eight (8) 4 Ft. Vapor proof Fluorescent Ceiling Lights with W/P Wall Switches

Two (2) 120 VAC Exterior GFI Duplex Receptacles with Weatherproof Covers

Twelve (12) 120 VAC GFI Interior Duplex Receptacles with Weatherproof Covers

Two (2) 500 Watt Recessed Halogen Scene Lights (1 CS, 1 Rear)

Six (6) 12VDC Interior & Exterior Dome Lights with Switch ( 7 Interior, 6 Exterior)

Marine Deep Cycle Battery, Battery Box, and Automatic Charge

Plumbing Equipment

Stainless Steel Hand Sink Knee Pedal Operators and LP Gas Instant Water Heater

Two (2) Stainless Steel Hand Sink with Gooseneck Faucets and Knee Pedal Operators

One (1) Double Bowl SS Sink (18 x 18)

ABS Floor Drains to Standard RV Outlet with Locking Valve

Slaughterhouse Equipment - Included

18 x 60 Stainless Steel Hinged Packing Table

Mountings, Installation, and Connections for Processing Equipment

Slaughterhouse Equipment – Basic

PM Rotary Stainless Steel Scalder

PM 27” Stainless Steel Picker

PM 6 Bird Inline Kill Cabinet

PM 60” Evisceration Table


Stainless Steel Conveyor Line for Rollers and Shackles

Stun Knife

Kill Rack

Broiler Kill Cone

Tom Kill Cone

4 Man Eviscerating Trough/Table 28 x 60

Combination Turkey Broiler Shackles with Rollers

Giblet Station

Catch Table

Chill Tanks



And More.

We are also able to remove equipment such as air curtains, side door, propane bottle holders, etc. Each unit is built to your specifications so please call us for specifics.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category